Electronic buzzer Low voltage buzzer from China manufacturer

Place of Origin:

Zhejiang, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: BPC1475-0540

Black Active Buzzer Pins 14

Black Active Buzzer Pins 14MM ,5V Piezoelectric Transducer
Quick Detail:
1.Rated voltage: 5V DC
2.Maximum rated current: 10mA
3.Minimum sound output: 85dB at 10cm
4.Frequency: 4000Hz ± 500Hz
5.Tone nature: continuous
6.Operating temperature: -20 - +70°C
7.Storage temperature: -30 - +80°C
8.Weight: 1.3g
Description:

buzzer
Piezo Buzzer with build-in oscillating
Piezo Buzzer
5V Buzzer
14mm Piezo Buzzer

Specification:
1.Technical Parameter
Measuring condition
Part shall be measured under a condition (Temperature: 535, Humidity: 45%85%R.H., Atmospheric pressure: 860 1060hPa) unless the standard condition (Temperature: 25±3, Humidity: 60±10%R.H. Atmospheric pressure: 860 1060hPa) is regulated to measure.

1	Rated Voltage	5VDC
2	Operating Voltage	3 – 12VDC
3	Rated Current	Max.10mA, at 5VDC
4	Sound Output at 10cm	Max.85dB, at 5VDC
5	Resonant Frequency	4000±500 Hz
6	Tone	Continuous
7	Operating Temperature	-20 - +70
8	Storage Temperature	-30 - +80
9	RoHS	Yes
10	Weight	Approx 1 g

2. Dimensions Unit: mm Tolerance: ±0.5mm Except Specified

*Housing Material: Black PPO
3. Reliability Test
After any following tests the part shall meet specifications without any degradation in
appearance and performance except SPL. SPL shall not deviate more than -10 dB
from the initial value
(1)Ordinary Temperature Life Test
The part shall be subjected to 96 hours at 25±10. Input rated voltage
Resonant frequency, 1/2 duty Square wave.
(2)High Temperature Test
The part shall be capable of with standing a storage temperature of +80 for 96 hours.
(3)Low Temperature Test
The part shall be capable of with standing a storage temperature of -30 for 96 hours.
(4)Humidity Test

Temperature:+40±3 Relative Humidity:90%95% Duration: 48 hours
and expose to room temperature for 6 hours
(5)Temperature Shock Test
Temperature:70 /1hour→ 25/3hours→-30/1hour→ 25/3hours (1cycle)
Total cycle: 10 cycles
(6)Drop Test
Standard Packaging From 75mm(Drop on hard wood or board of 5cm thick,
three sides, six plain.)
(7)Vibration Test
Vibration:1000cycles /min. Amplitude:1.5mm, Duration: 1 hour in each 3 axes
Note:
As this product is not protected from foreign material entering, please make sure that any foreign materials (e.g. magnetic powder, washing solvent, flux, corrosive gas) do not enter this product in your production processes. The functional degradation (e.g. SPL down) may occur if foreign material enter it